
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X55-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 55mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X55-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 25-55mm usable travel window. The external stopper allows you to trim the nominal 55mm stroke by up to 30mm without adding external stops.
This adjustable model omits the FB, CA, CB, and CR mounts, utilizing a reduced set of ISO 15552 interfaces (Basic, FA, LB, TC, FTC, TCM1, TCM2). The rear adjuster acts purely as a travel stop to fine-tune end positions, meaning it will not hold a load without live air pressure. For load-holding requirements, a SAIL or BSAI cylinder is recommended.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X55-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 25-55mm travel distance during commissioning to perfect end-of-stroke positioning without machining new hard stops.
Quickly adjust the retract end-stop when running a new product size on the line, reducing downtime between production batches.
Use the 30mm adjustment range to compensate for mechanical wear or slight variations in upstream feeding mechanisms.
Choose this 40mm bore when you need more force than a 32mm bore (402N at 0.5 MPa) but want to avoid the larger footprint of a 50mm bore (982N at 0.5 MPa). The adjustable stroke is ideal for machine setup and product changeovers, allowing you to dial in the exact end-stop on the fly rather than swapping to a fixed-stroke SAI cylinder. Ensure your setup matches the PT tapered port thread and standard carbon steel rod. Because the stroke is only 55mm, side-loading risks are minimal, but an external guide is still recommended for optimal rod bearing life.
Quick checklist
The rear adjusting screw allows you to shorten the effective stroke by up to 30mm from the nominal 55mm, creating a 25-55mm usable travel window. The adjuster acts as a mechanical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.