
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X55-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 55mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X55-30-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 55mm stroke that can be dialed back by up to 30mm, creating a precise 25-55mm usable travel window. This on-cylinder fine-tuning allows you to set exact end positions at commissioning without adding external stops or swapping the barrel.
Equipped with a magnet for position sensing, this unit integrates seamlessly with AirTAC CMSE reed and DMSE solid-state switches mounted into the extruded aluminum barrel's dual sensor grooves. The PT tapered port threads ensure a reliable pneumatic connection. Unlike a tie-rod design, this extruded profile body maintains a compact footprint while offering a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the rear adjuster functions strictly as a travel stop for deceleration and positioning, not as a load-holding lock.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X55-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 25-55mm travel window during product size transitions to set new end positions rapidly without physically swapping cylinders or repositioning external hard stops.
Leverage the -S magnet and dual sensor grooves to install CMSE or DMSE switches, fine-tuning the exact trigger point alongside the physical rear stroke adjustment.
Compensate for mechanical tolerance stack-up during machine commissioning by trimming the 55mm stroke back precisely to the required process distance.
The adjustable 25-55mm travel window is ideal for dialing in exact motion profiles on the fly, whereas a fixed-stroke SAI cylinder locks you into a single 55mm distance. For exact dimensional interchangeability, match the 40mm bore, 55mm nominal stroke, 30mm adjustment, PT G1/4 port, and the -S magnet requirement.
Because the stroke is relatively short, side-load risks from an unsupported rod are minimal, though external guides are always recommended for lateral loads. If your process requires the load to be held mechanically without live air pressure, this cylinder's adjuster will not act as a brake; you must specify a SAIL (air-released lock) or BSAI (clamp-lock) cylinder, or install an external rod lock.
Quick checklist
It features a rear adjusting screw that acts as a stopper, allowing you to shorten the effective stroke by up to 30mm. This creates a usable travel window of 25-55mm, enabling fine-tuning of the end position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.