
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X55-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 55mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X55-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down to a 15-55 mm window. The carbon steel piston rod features an M12x1.25 thread, providing a robust interface for your mounting attachments.
This adjustable model uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on some standard cylinders. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is added later. The PT tapered port threads match the G1/8 air supply interface for this bore size.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X55-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract end-stop during product size changeovers on a packaging line without adding external stopper blocks.
Set precise travel limits for assembly pick-and-place routines where the exact 15 to 55 mm stroke window must be tuned on-site.
Fine-tune the final resting position of a clamping or pressing fixture during initial commissioning to avoid crushing delicate workpieces.
Choose this 40 mm bore adjustable cylinder when your application requires precise end-position tuning at commissioning or during product changeover without swapping out the physical cylinder. Conversely, moving up to a 50 mm bore provides 982 N. The rear adjuster acts purely as a mechanical stop to set the retract position and does not hold the load without live air; for true load-holding without pressure, consider the SAIL or BSAI series.
When specifying a replacement, confirm the 40 mm bore, 55 mm stroke, up to 40 mm adjustment range, PT port threads, and the required mounting style. Because the stroke is under 300 mm, side-load stress on the M12x1.25 rod is minimal, though external guides are always recommended for heavy lateral loads.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the nominal 55 mm stroke by up to 40 mm, giving an adjustable usable travel window of 15 to 55 mm. It functions as a travel stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.