
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X55-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 55mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X55-40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The integrated -S magnet enables position sensing with AirTAC CMSE reed or DMSE electronic switches.
This model features a 55mm nominal stroke with a 40mm adjustment range, creating a highly versatile 15-55mm usable travel window. The carbon steel rod and M12x1.25 thread handle moderate side loads well, while the extruded aluminum barrel includes sensor grooves on both sides. The rear screw acts as a travel stop for fine-tuning at commissioning, not as a lock to hold loads without live air.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X55-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 15-55mm travel window on packaging lines when switching to different package lengths, without replacing the cylinder.
Fine-tune the retract end-stop during initial commissioning to perfectly time the 628N stroke without adding external stoppers.
Adjust the effective stroke on the fly for automated assembly presses requiring precise positioning across a short travel range.
The 15-55mm adjustable travel window is perfect for machines requiring precise end-position tuning during product changeovers, avoiding the need to swap fixed-stroke SAI cylinders or add external stops. For load-holding without continuous air pressure, use an external rod lock or select the SAIL or BSAI series.
Because the usable stroke is dialed down from the 55mm nominal length, you can fine-tune the retract end without mechanical modifications. This cylinder uses a PT tapered port thread and supports the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR mounts.
Quick checklist
It has a 55mm nominal stroke with a 40mm adjustment range, giving a usable travel window of 15-55mm. The rear screw acts as a mechanical stop to fine-tune the end position without swapping cylinders.
At 0.7MPa, the push force increases to 879N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.