
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X550-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 550mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X550-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 450-550 mm usable travel window, letting you dial back the 550 mm nominal stroke by up to 100 mm during commissioning. The extruded aluminum barrel features sensor grooves on both sides for flexible mounting of CMSE reed and DMSE solid-state switches.
This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops when fine-tuning end positions. It uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. The carbon steel rod and M12x1.25 thread handle standard loads, while the PT tapered port ensures a tight pneumatic connection.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X550-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 450-550 mm travel window during machine commissioning to dial in exact end positions without changing the cylinder.
Adjust the retract stop on the fly to accommodate different package sizes moving down a packaging or conveying line.
Use the 100 mm adjustment range to precisely set the retract end-of-stroke position for machining or clamping fixtures.
The SAIJ40X550-100-S is selected when a 450-550 mm adjustable travel window is needed for product changeovers or precise end-position tuning. Because the nominal stroke is 550 mm, an external guide is recommended to prevent excessive side loading on the rod. The rear adjuster acts as a travel stop and does not hold the load without live air; for true load-holding, consider an external rod lock, a pilot-operated check valve, or the AirTAC SAIL and BSAI series. It is dimensionally interchangeable per ISO 15552 and includes a magnet for CMSE / DMSE sensors.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the 550 mm nominal stroke by up to 100 mm, creating a 450-550 mm usable travel window. It is a travel stop, not a lock, and will not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.