
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X550-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 550mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X550-10-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster, featuring a carbon steel rod and PT tapered ports. The built-in -S magnet supports CMSE reed and DMSE electronic sensors for precise end-position detection.
This model features a 550 mm nominal stroke with a 10 mm rear adjustment screw, creating a usable travel window of 540 to 550 mm. This allows you to fine-tune the retract end position at commissioning without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting set omits FB, CA, CB, and CR options.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X550-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within a 540-550 mm window during initial commissioning without swapping out the entire cylinder.
Quickly adjust the end-stop position on a packaging line when switching between different product sizes, saving setup time.
Fine-tune the extended stop position of a diverter arm to accommodate varying package lengths on the fly.
If your application needs less force, stepping down to a 32 mm bore yields 402N. The rear adjuster acts as a travel stop for deceleration and end-position tuning, not a lock; it will not hold the load without live air. For load-holding without pressure, consider an AirTAC SAIL or BSAI cylinder.
Because this 550 mm stroke is long relative to the 16 mm rod diameter, it is highly recommended to use an external guide to prevent excessive side loading. This cylinder is dimensionally interchangeable with ISO 15552 cylinders such as the SMC CDQ2 series, featuring a G1/4 port and a 30 mm cushion.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 10 mm, providing a usable travel window of 540 to 550 mm. It acts as a mechanical stop to set the end position and must not be used as a load-holding lock without live air pressure.
At 0.7 MPa, the push force increases to 879N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.