
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X550-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 550mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X550-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because this SKU carries a -30 adjustment code, you can fine-tune the effective travel down from the 550mm nominal stroke to a minimum of 520mm, creating a precise 520-550mm usable window for product changeovers.
This model includes a built-in magnet for position sensing and works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches. The extruded aluminum barrel provides sensor grooves on both sides, and the PT tapered port threads ensure a tight pneumatic seal. The rear adjuster acts purely as a mechanical stop to set the end position and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X550-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 520-550mm travel window during format changes to accommodate different package lengths without physically swapping the actuator.
Fine-tune the retract end-stop during machine commissioning to achieve exact positioning, compensating for mechanical tolerances in the fixture.
Adjust the stroke length on the fly for sorting or diverting applications on a conveyor where the required push distance varies by product type.
An adjustable-stroke cylinder is preferred over a fixed SAI model when you need to dial in the exact end-of-stroke position during commissioning or when adapting to slightly different product sizes on a line, all without swapping the cylinder or adding external stops. For a direct ISO 15552 replacement, match the 40mm bore, 550mm stroke, -30 adjustment, PT port, and -S magnet.
With a 550mm stroke, the 16mm rod is subject to increased side-loading risks if the load is unsupported. Always use an external guide rail to prevent rod bending and premature seal wear. If your machine requires the load to be held mechanically without continuous air pressure, note that the rear adjuster is only a travel stop; you would need an external rod lock or a related SAIL pneumatic lock cylinder instead.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw allows you to shorten the 550mm nominal stroke by up to 30mm, providing an effective travel window of 520-550mm. It functions as a mechanical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.