
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X60-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 60mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X60-10 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 40mm bore and a 60mm nominal stroke, yielding a usable travel window of 50 to 60mm so you can dial in the exact retract position during commissioning.
This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible switch mounting. It uses a standard carbon steel piston rod with an M12x1.25 thread, and its PT tapered port ensures a tight pneumatic connection. The rear stopper sets the travel end-point, but it is not a locking mechanism; live air is required to hold the load.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 50 to 60mm retract distance during machine setup to perfect part seating without machining custom spacers.
Quickly adjust the stroke by up to 10mm on a packaging line when switching between slightly different product sizes.
Fine-tune the clamping reach on a 40mm bore actuator to accommodate varying material thicknesses safely.
The 10mm adjustment window is ideal for applications requiring precise end-position tuning without adding external stops or swapping out a fixed-stroke SAI cylinder. To match this ISO 15552 footprint exactly, specify the 40mm bore, 60mm stroke, PT port thread, and your required mounting option.
Because the stroke is under 300mm, side-load stress on the M12x1.25 rod is minimal, though an external guide remains recommended for heavy lateral loads. Remember that the rear adjuster acts only as a travel stop; for true load-holding without continuous air pressure, consider an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke from its 60mm nominal length down to 50mm. It fine-tunes the travel end-point but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.