verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-10S

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X60-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 60mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke60 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$71.15 $78.65Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-10S

The AirTAC SAIJ40X60-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 50 to 60 mm for precise end-position tuning. Fitted with a -S magnet, it directly supports AirTAC CMSE reed and DMSE electronic sensors to track piston position along its extruded aluminum barrel.

This adjustable-stroke variant allows you to trim the retract position by up to 10 mm during commissioning without swapping the cylinder or adding external stops. The rear screw acts purely as a travel stop and works in tandem with the standard 30 mm air cushions at both ends to decelerate the load. It is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-10S Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X60-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke60 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-10S

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×60Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-10S Is Used

tune

Machine Setup Changeover

Dial in the exact 50 to 60 mm retract position during product line changeovers without physically swapping cylinders or installing external mechanical stops.

precision_manufacturing

Variable End-Stop Positioning

Fine-tune the final end position by up to 10 mm at commissioning to perfect the placement of parts on a manufacturing line.

settings_input_component

Sensor-Driven Operations

Leverage the built-in -S magnet to trigger CMSE reed or DMSE electronic sensors for precise timing in automated assembly processes.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-10S the Right Cylinder?

The adjustable stroke is ideal for machine setups requiring variable end stops or product-size changeovers, offering finer control than a fixed-stroke SAI cylinder. The PT tapered port thread ensures a tight pneumatic seal.

Because the rear adjuster and air cushions only set the travel end and decelerate the load, a plain SAIJ does not hold position without live air. For load-holding without continuous pressure, consider the SAIL or BSAI variants. To replace an ISO 15552 cylinder, match the 40 mm bore, 60 mm stroke, 10 mm adjustment, PT port, preferred mounting, and -S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-10S FAQ

At 0.7 MPa, the push force increases to 879 N.

The rear adjuster screw allows you to shorten the nominal 60 mm stroke by up to 10 mm, creating a 50 to 60 mm usable travel window. It functions as a travel stop and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X60-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.