
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X60-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 60mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X60-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 40 to 60 mm, allowing you to dial back the 60 mm nominal stroke by up to 20 mm during commissioning.
Equipped with a -S magnet, this unit supports AirTAC CMSE reed and DMSE electronic sensors housed in the dual-side sensor grooves of the extruded aluminum barrel. The PT tapered port threads and carbon steel rod are standard, while the rear adjuster functions strictly as a mechanical stop to set the retract position and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 40 to 60 mm during machine commissioning to perfect seating or clamping depth without external spacers.
Quickly adapt the stroke window on packaging lines when handling slightly different product sizes, minimizing downtime between runs.
Select this 40 mm bore cylinder when an application requires fine-tuning of the end-of-stroke position without swapping out the actuator. If your process needs less force, stepping down to a 32 mm bore yields 402 N at 0.5 MPa; if you require significantly more thrust, a 50 mm bore provides 982 N. The SAIJ40X60-20-S is chosen over a fixed-stroke SAI model specifically for setups that demand variable end stops or product-size changeovers.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 60 mm stroke, 20 mm adjustment range, PT port threads, and the -S magnet requirement. The SAIJ series supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options. For any load-holding requirements without live air pressure, look to the SAIL or BSAI series instead of relying on the rear stopper.
Quick checklist
The maximum operating pressure is 1.0 MPa.
The rear adjuster acts as a mechanical stop that lets you shorten the 60 mm nominal stroke by up to 20 mm, creating a 40 to 60 mm usable travel window. It only sets the end position and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.