
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X60-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 60mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X60-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to trim the 60 mm nominal stroke back by up to 30 mm. This yields a highly flexible 30-60 mm usable travel window, perfect for fine-tuning end positions at commissioning without swapping the actuator. It features a standard carbon steel piston rod and a PT tapered port thread.
The extruded aluminum barrel includes sensor grooves on both sides, and while this unit lacks a magnet, adding an -S magnet enables CMSE reed and DMSE electronic solid-state switches for position sensing.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 30-60 mm travel window during format size changes on a packaging line, using the rear screw to set the exact extended position without changing the cylinder.
Provide adjustable physical stops for clamping or pressing tasks where the exact 40 mm bore travel distance needs on-the-fly mechanical adjustment.
The 30 mm adjustment range is ideal for product-size changeovers on a line, letting you dial in the exact stop without bolting on external physical stops. Remember that the rear adjuster functions strictly as a travel stop, not a lock; the SAIJ does not hold loads without live air, so consider an SAIL or BSAI cylinder if dead-load holding is required.
To match this ISO 15552 dimensionally interchangeable cylinder, specify a 40 mm bore, 60 mm stroke, 30 mm adjustment, PT port thread, and your required mounting from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that FB, CA, CB, and CR mounts are omitted from this adjustable series.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster acts as an external stopper that shortens the 60 mm stroke by up to 30 mm, creating a 30-60 mm usable travel window. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.