
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X60-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 60mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X60-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 40mm bore and a 60mm nominal stroke, yielding a highly versatile 30 to 60mm usable travel window.
This model includes a magnetic piston (-S) for use with AirTAC CMSE reed and DMSE electronic sensors, which seat cleanly into the sensor grooves on both sides of the extruded aluminum barrel. The standard carbon steel rod features an M12x1.25 thread, and the body uses a PT tapered port. The rear adjuster acts purely as a travel stop for fine-tuning end positions during commissioning, so live air is still required to hold the load in place.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 30 to 60mm travel window during line format changes to accommodate varying package sizes without physically replacing the actuator.
Fine-tune the end-stop during machine commissioning to find the exact clamping position, preventing over-travel on delicate components.
Use the rear adjuster to create a customizable physical stop for assembly presses that require slight positional shifts between different workpieces.
The 30mm adjustment range is ideal for prototyping cells or product changeovers where the exact end-of-stroke position varies by a few centimeters, allowing you to dial in the 30-60mm travel window without swapping out the cylinder or adding external mechanical stops. If your application requires the cylinder to hold its position without continuous air pressure, you will need an external rod lock or a different AirTAC series like the SAIL or BSAI, as the SAIJ adjuster is a stop, not a locking mechanism.
To match this ISO 15552 interchangeable cylinder exactly, confirm the 40mm bore, 60mm stroke, 30mm adjustment range, PT port thread, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles found on some other series.
Quick checklist
At 0.9 MPa, the push force increases to 1130N.
The rear adjuster screw allows you to shorten the effective travel from the 60mm nominal stroke down to as little as 30mm, creating a 30-60mm usable window. It acts as a mechanical stop to set the position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.