verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-40

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X60-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 60mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke60 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$68.36 $75.86Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-40

The AirTAC SAIJ40X60-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 60 mm travel back by up to 40 mm. This yields a highly versatile 20-60 mm usable stroke window, letting you dial in the exact end position at commissioning without swapping out the actuator or bolting on external stops.

The rear adjuster acts strictly as a travel stop that works alongside the variable air cushions at both ends to decelerate the load; it is not a locking mechanism and will not hold a load without continuous live air pressure. For load-holding requirements without live pressure, consider the SAIL or BSAI series. This SAIJ model accepts PT tapered port threads (G1/4) and supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-40 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X60-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke60 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-40

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×60Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-40 Is Used

tune

Machine Changeovers

Rapidly reconfigure end-stops for different product lengths on a packaging line by dialing the 20-60 mm travel window instead of swapping actuators.

precision_manufacturing

End-Position Tuning

Fine-tune the retract stroke during initial commissioning to achieve exact positioning without adding external mechanical stops to the fixture.

settings_input_component

Variable End-Stops

Adjust the effective stroke on the fly to accommodate varying material thicknesses or clamping depths in light assembly presses.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-40 the Right Cylinder?

The adjustable stroke is ideal for production lines running multiple product sizes, as the 20-60 mm travel window allows operators to fine-tune end positions during changeovers rather than installing a fixed-stroke SAI cylinder. Because the stroke is short, side-load risks are minimal, but always ensure the 16 mm rod and M12x1.25 thread are properly aligned with your external guide mechanism. If you need position holding without live air, step up to a SAIL or BSAI lock cylinder instead of relying on the rear stopper.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-40 FAQ

At 0.7 MPa, the push force increases to 879 N.

The rear adjuster screw allows you to shorten the nominal 60 mm stroke by up to 40 mm, creating a usable travel window of 20-60 mm. This stopper sets the end position but does not lock or hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X60-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.