
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X60-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 60mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X60-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 20 to 60 mm, letting you dial back the 60 mm nominal stroke by up to 40 mm during commissioning.
This model uses a PT G1/4 tapered port and relies on variable air cushions at both ends to decelerate the load. The rear adjuster functions strictly as a travel stop, meaning it cannot hold a load in place without continuous live air pressure. For applications requiring true fail-safe load holding, you would need to step up to an SAIL pneumatic lock or an external rod lock.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the 20-60 mm stroke window on packaging lines when switching between different carton sizes without removing the cylinder.
Dial in the exact end-of-stroke position during initial commissioning to prevent mechanical crashes, using the rear screw rather than external shims.
Adjust the retract position on the fly for automated assembly presses that need precise depth control across different batch runs.
The 40 mm adjustment range on a 60 mm stroke is ideal for machines that undergo frequent product changeovers, allowing you to reposition the end stop precisely without swapping out the cylinder or adding external mechanical stops.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 60 mm stroke, PT G1/4 port, and the -S magnet requirement. The -S magnet enables integration with AirTAC CMSE reed switches or DMSE solid-state electronic sensors. SAIJ mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.
The rear adjuster screw allows you to shorten the 60 mm nominal stroke by up to 40 mm, creating a usable travel window of 20 to 60 mm. The adjuster acts as a physical stop and works with the air cushion to decelerate the piston, but it does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.