
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X60-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 60mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X60-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 60mm stroke that can be dialed back by up to 50mm, yielding a highly versatile 10-60mm usable travel window. This on-the-fly tuning allows you to set exact end positions at commissioning without swapping hardware.
The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. This model uses a standard carbon steel piston rod with an M12x1.25 thread and PT tapered ports. It supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear adjuster acts purely as a mechanical stop to set travel limits and relies on the variable air cushions at both ends for deceleration.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X60-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 10 to 60mm stroke needed for different product sizes on a packaging line without disassembling the cylinder or adding external stopper blocks.
Fine-tune the retract end position during commissioning to perfectly mate the tooling, compensating for mechanical tolerances in the fixture.
An adjustable stroke is highly beneficial for prototyping or production lines that undergo frequent product-size changeovers, as it replaces the need to maintain an inventory of fixed-stroke SAI cylinders for every specific length. To match this ISO 15552 cylinder for a replacement, verify the 60mm nominal stroke, 50mm adjuster, PT port thread, and the specific mounting accessory.
Because the rear adjuster is a travel stop and not a locking device, this SAIJ model cannot hold a load without live air pressure. If your fixture requires fail-safe load holding in the event of air loss, you should explore the SAIL series with an air-released lock or the BSAI clamp-lock variant instead.
Quick checklist
The 60mm nominal stroke can be adjusted backward by up to 50mm via the rear screw, creating a usable travel window of 10 to 60mm.
No, the rear adjuster functions only as a mechanical travel stop to set the end position. It does not lock or hold the load without live air pressure. For fail-safe load holding, consider the SAIL or BSAI series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.