verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-10

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X600-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 600mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke600 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$118.61 $126.11Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-10

The AirTAC SAIJ40X600-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The integrated 10mm adjustment screw allows you to trim the effective travel, creating a 590-600mm usable stroke window for precise end-position tuning during commissioning.

This 40mm bore variant omits the FB, CA, CB, and CR mounts, retaining a focused set of ISO 15552 interfaces: Basic, FA, LB, TC, FTC, TCM1, and TCM2. The carbon steel rod and M12x1.25 thread provide robust load transmission, while the extruded aluminum barrel incorporates dual sensor grooves for mounting CMSE reed or DMSE electronic switches if needed later.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-10 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X600-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke600 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-10

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×600Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-10 Is Used

conveyor_belt

Product Size Changeovers

Dial in the 590-600mm travel window on the fly to accommodate varying package lengths on a packaging line without swapping hardware.

precision_manufacturing

End-Position Tuning

Use the 10mm rear stopper to fine-tune the exact retraction point during machine commissioning, compensating for mechanical tolerance stack-up.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-10 the Right Cylinder?

The 10mm rear stopper is ideal for fine-tuning the end position without adding external stops. If your changeover requires less force, step down to a 32mm bore offering 563N; if you need more clamping power, a 50mm bore provides 1374N. Because the stroke is 600mm, an external guide rail is recommended to prevent excessive side-loading on the M12x1.25 rod.

This SAIJ model is dimensionally interchangeable per ISO 15552. It is a double-acting cylinder, meaning the rear adjuster and air cushions only decelerate the load; they do not hold position without live air. For load-holding requirements, consider the SAIL or BSAI series instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-10 FAQ

It features a rear adjusting screw that lets you shorten the nominal 600mm stroke by up to 10mm, providing a usable travel window of 590-600mm. The adjuster acts as a mechanical stop at the retract end and does not lock the load without live air pressure.

It operates at speeds between 30 and 800 mm/s.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X600-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.