
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X600-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 600mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X600-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 600 mm stroke with an adjustable travel window of 580 to 600 mm, allowing you to dial back the extend position by up to 20 mm during commissioning.
Equipped with a 16 mm carbon steel rod and M12x1.25 thread, it handles moderate side loads, though a 600 mm stroke warrants an external guide for optimal stability. The extruded aluminum barrel includes sensor grooves on both sides, and mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the extend end-position by up to 20 mm when switching between product sizes on a packaging line, eliminating the need to physically swap out the cylinder.
Dial in the exact 580 to 600 mm travel distance required for multi-stage forming operations, ensuring precise contact without relying on external hard stops.
Adjust the rear stopper screw during initial setup to perfectly time the 600 mm stroke with downstream equipment, preventing mechanical crashes.
Choose this 40 mm bore when you need precise end-position tuning without swapping cylinders or adding external stops. If your application requires less force, the 32 mm bore offers 402 N at 0.5 MPa; for heavier loads, the 50 mm bore provides 982 N. The rear adjuster acts purely as a mechanical stop and does not hold the load without live air—use SAIL or BSAI variants for true load-holding.
For ISO 15552 replacement, match the 40 mm bore, 600 mm stroke, 20 mm adjustment, PT tapered port thread, and standard carbon steel rod. Because the stroke is 600 mm, ensure an external guide supports the rod to prevent excessive side-load wear.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm, providing a usable travel window of 580 to 600 mm. It acts as a mechanical stop and does not lock the load without continuous air pressure.
At the maximum operating pressure of 1.0 MPa, it delivers up to 128 kgf of push force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.