verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-30

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X600-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 600mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke600 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$118.61 $126.11Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-30

The AirTAC SAIJ40X600-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 570-600 mm usable travel window by allowing you to trim the 600 mm nominal stroke back by up to 30 mm. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.

This model uses a 16 mm carbon steel rod with an M12x1.25 thread, paired with 30 mm variable air cushions at both ends to manage end-of-travel kinetic energy. The rear stopper acts purely as a travel end-setter, not a lock, so it will not hold a load without live air pressure. For load-holding without continuous air, consider the SAIL or BSAI variants.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-30 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X600-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke600 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-30

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×600Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-30 Is Used

tune

Machine Changeover

Dial in the exact retract position within the 570-600 mm window when switching between product sizes on a shared line.

conveyor_belt

Adjustable Push-Off

Fine-tune the end stop for varying package lengths without physically replacing the actuator or adding mechanical spacers.

precision_manufacturing

End-Position Calibration

Trim up to 30 mm of travel during commissioning to perfectly align tooling offsets without external stopper hardware.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-30 the Right Cylinder?

The adjustable 30 mm window is ideal for product changeovers, eliminating the need to swap cylinders or bolt on external stops compared to a fixed-stroke SAI model. To match this ISO 15552 replacement, specify the 40 mm bore, 600 mm stroke, PT tapered port threads, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Because the 600 mm stroke is long relative to the 40 mm bore, the unsupported piston rod is susceptible to side-loading. Always guide the load externally to prevent rod bending and premature seal wear, even though the 16 mm rod diameter offers decent rigidity.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-30 FAQ

The rear adjuster screw lets you shorten the effective travel from 600 mm down to as little as 570 mm. This stopper sets the retract end position but does not lock the load; live air pressure is still required to hold position.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X600-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.