
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X600-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 600mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X600-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 560-600 mm usable travel window, allowing you to dial back the 600 mm nominal stroke by up to 40 mm during commissioning.
The rear adjuster acts purely as a travel stop for end-position tuning and works alongside the 30 mm air cushions at both ends. It is not a locking mechanism and will not hold a load without live air pressure. This extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches if a magnet is added later.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the 560-600 mm travel window during product size changes without swapping the cylinder or adding external stopper blocks.
Ideal for diverter mechanisms where the exact retract position needs 40 mm of field adjustment to accommodate varying package lengths.
Perfect for dialing in the exact end-of-stroke contact point during initial commissioning of a new assembly line.
The 40 mm adjustment range is selected when you need precise variable end-stops for product changeovers rather than a fixed-stroke SAI cylinder. For load-holding without live air, consider the SAIL or BSAI series instead. To match ISO 15552 replacement dimensions, specify the 40 mm bore, 600 mm stroke, 40 mm adjustment, PT tapered port thread, and your required mounting from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the stroke is 600 mm, an external guide is recommended to prevent side-load damage to the 16 mm rod and M12x1.25 thread.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 128 kgf.
The rear adjuster screw lets you shorten the effective travel from the nominal 600 mm down to 560 mm. This stopper fine-tunes the retract end position but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.