
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X600-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 600mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X600-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the effective travel. With a 600 mm nominal stroke and a 75 mm adjustment range, you can dial the end position back to anywhere between 525 and 600 mm.
Because the adjustment mechanism acts as a hard stop at the retract end, you can fine-tune the travel limit during commissioning without adding external physical stops. The extruded aluminum barrel includes sensor grooves on both sides for adding CMSE reed or DMSE electronic switches, though this specific SKU ships without a magnet. It supports speeds from 30 to 800 mm/s and uses a PT G1/4 port.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X600-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position between 525 and 600 mm during machine setup, eliminating the need to swap cylinders when adjusting for minor product length differences.
Quickly reconfigure the stroke limit on packaging lines to handle varying package sizes without bolting on external physical stops or ordering new cylinders.
Use the 75 mm rear adjustment window to perfectly synchronize end-of-stroke positions across multiple axes during initial machine commissioning.
Choose this adjustable-stroke model when your machine requires variable end-position tuning for product changeovers, rather than a fixed-stroke SAI cylinder. For lighter duties, the 32 mm bore provides 402 N.
At a 600 mm stroke, the 16 mm carbon steel rod and M12x1.25 thread face increased side-load risks, so an external guide is recommended to prevent rod bending. Remember that the rear adjuster is a travel stop, not a lock; the SAIJ does not hold loads without live air pressure. For load-holding without continuous air, consider the SAIL or BSAI series. This cylinder is dimensionally interchangeable per ISO 15552 and uses the SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster acts as a mechanical stop that lets you shorten the 600 mm nominal stroke by up to 75 mm, creating a usable travel window of 525 to 600 mm for fine-tuning end positions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.