
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X65-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 65mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X65-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down to a 55-65 mm window. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
This model uses a carbon steel piston rod with an M12x1.25 thread and PT tapered ports. The rear adjustment screw functions strictly as a mechanical stop to dial in end positions during commissioning; it does not lock the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 55-65 mm travel window during equipment commissioning or product size changes without swapping out the entire cylinder body.
Use the rear mechanical stopper to fine-tune the retract position for precise locating fixtures and tooling endpoints on the assembly line.
Select this 40 mm bore cylinder when your application requires precise end-position tuning without adding external stops. The rear adjuster allows up to 10 mm of stroke trimming, which is ideal for machine setup and product changeovers. Conversely, lighter duties can use the 32 mm bore, which provides 402 N.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 65 mm stroke, PT port thread, and the 10 mm adjustment code. The available mounting set is reduced to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Since this is a non-magnet model, it does not support CMSE or DMSE sensors without adding the -S option.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the 65 mm nominal stroke by up to 10 mm, creating a 55-65 mm usable travel window. It requires live air to operate and does not lock the load in place.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.