
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X65-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 65mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X65-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, letting you dial back the effective travel to a 55-65 mm window without adding external stops. The integrated -S magnet enables position sensing with AirTAC CMSE reed or DMSE electronic switches.
This model features a standard carbon steel piston rod with an M12x1.25 thread and a PT tapered G1/4 port. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. The rear adjuster acts purely as a travel stop for end-position tuning and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 55-65 mm retract distance during machine commissioning to perfect part seating without machining external stopper blocks.
Quickly adapt the stroke window on a packaging line when switching to a slightly different carton size, minimizing downtime between production runs.
Use the 10 mm adjustment range to compensate for mechanical wear or sensor drift over time, ensuring repeatable clamping force.
Select this 40 mm bore adjustable-stroke cylinder when your machine setup requires precise end-position tuning at commissioning or during product changeovers, avoiding the need to swap a fixed-stroke SAI cylinder.
For load-holding without continuous air pressure, this plain SAIJ is insufficient—the rear adjuster is a stop, not a lock—so consider an SAIL or BSAI cylinder instead. To match this ISO 15552 interchangeable unit, specify the 40 mm bore, 65 mm nominal stroke, 10 mm adjustment, PT G1/4 port, and the -S magnet option.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw lets you mechanically shorten the 65 mm nominal stroke by up to 10 mm, creating a 55-65 mm usable travel window. It functions as a hard stop for end-position tuning and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.