verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-30S

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X65-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 65mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke65 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$71.15 $78.65Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-30S

The AirTAC SAIJ40X65-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 65 mm stroke that can be fine-tuned down by up to 30 mm, giving you a usable travel window of 35 to 65 mm. In this magnet-equipped (-S) configuration, the extruded aluminum barrel works seamlessly with CMSE reed and DMSE solid-state sensors seated in the dual-side grooves.

The rear adjustment screw sets the retract end-position precisely during commissioning, but it acts strictly as a travel stop and does not hold the load without live air pressure.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-30S Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X65-30S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke65 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-30S

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×65Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-30S Is Used

tune

Changeover Positioning

Dial in the exact retract distance within the 35-65 mm window when switching product sizes on a packaging line.

settings_input_component

Machine Setup

Fine-tune the end-of-stroke stop during commissioning to perfect sensor alignment without machining external stopper blocks.

precision_manufacturing

Variable End Stops

Adjust the effective travel on the fly for delicate pressing or clamping tasks that require precise depth control.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-30S the Right Cylinder?

Select this adjustable-stroke model when a process requires exact end-position tuning without adding external stops or swapping cylinders. It is preferred over a fixed SAI cylinder for product-size changeovers. The 16 mm rod and M12x1.25 thread handle moderate side loads, but you should always guide the load externally to prevent binding. To match this ISO 15552 interchangeable footprint, specify bore 40, stroke 65, adjustment 30, PT tapered port threads, your required mounting from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2), and the -S magnet.

Remember that the SAIJ rear adjuster and air cushions only decelerate the travel end; for true load-holding without live air, use an SAIL lock, BSAI clamp-lock, or external rod lock.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-30S FAQ

It operates at speeds between 30 and 800 mm/s.

The rear adjuster screw lets you trim the effective travel back by up to 30 mm, creating a usable stroke window of 35 to 65 mm. It functions as a mechanical stop to set the end position and does not lock the load.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X65-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.