
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X65-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 65mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Because this specific SKU carries a 40mm adjustment code on a 65mm nominal stroke, you gain a usable travel window of 25-65mm. This wide trim range lets you perfectly dial in the retract end-position during commissioning without swapping out the cylinder.
This 40mm bore utilizes a G1/4 port and a 16mm carbon steel rod with an M12x1.25 thread, offering robust resistance to side loads. The extruded aluminum barrel features sensor grooves on both sides, allowing you to easily mount CMSE or DMSE switches later if sensing is required. It supports a standard speed range of 30-800mm/s and includes adjustable air cushions at both ends to smooth out deceleration.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adapt retract distances on packaging lines when switching between different product sizes, using the 25-65mm window to set precise end positions on the fly.
Fine-tune the final end-of-stroke position during initial machine setup without machining external spacers or replacing the entire cylinder.
Provide flexible physical stops for assembly stations where the required retraction distance needs occasional adjustment based on the tooling installed.
An adjustable stroke is ideal for machine setups that undergo frequent product-size changeovers, eliminating the need to bolt on external stops or buy multiple fixed-stroke SAI cylinders.
When matching an ISO 15552 replacement, verify the 65mm stroke, 40mm adjustment range, PT tapered port thread, and your required mounting style. SAIJ supports a specific subset of mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true position holding, consider an external rod lock or the AirTAC SAIL series.
Quick checklist
If operating at 0.7 MPa, the push force increases to 879N.
The rear adjusting screw allows you to trim the effective stroke back by up to 40mm. This creates a usable travel window of 25-65mm, letting you set the exact retract end-position without changing the cylinder itself.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.