verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-40S

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X65-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 65mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke65 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$71.15 $78.65Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-40S

The AirTAC SAIJ40X65-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that lets you trim the effective travel back by up to 40 mm. With a 65 mm nominal stroke, this configuration yields a highly flexible 25-65 mm usable travel window, allowing precise end-position tuning at commissioning without swapping out the barrel or adding external stops.

Equipped with a built-in magnet (-S), this model supports AirTAC CMSE reed and DMSE electronic sensors along the dual-sided extruded aluminum barrel grooves. The rear adjuster acts purely as a mechanical stop to set the retraction end, working alongside the standard 30 mm air cushions to decelerate the load. It does not hold the load without live air; for pilot-operated locking, consider the SAIL or BSAI series.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-40S Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X65-40S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke65 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-40S

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×65Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-40S Is Used

tune

Machine Changeover

Dial in the 25-65 mm travel window during product size transitions without replacing the cylinder or bolting on external physical stops.

precision_manufacturing

End-Position Tuning

Fine-tune the retraction point at commissioning using the rear adjuster, perfect for dialing in exact clamping or pressing distances.

settings_input_component

Sensor-Ready Automation

Leverage the -S magnet with DMSE electronic or CMSE reed switches in the dual barrel grooves for precise position feedback in automated lines.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-40S the Right Cylinder?

The adjustable stroke is ideal for machine setups requiring a variable end-stop or product-size changeovers, offering more flexibility than a fixed-stroke SAI cylinder. It features a PT tapered port thread and a 16 mm carbon steel rod with an M12x1.25 thread.

Because the 65 mm stroke is relatively short, side-loading is less of a concern than with longer travels, but the load should still be guided to prevent rod binding. To match this cylinder dimensionally, ensure your ISO 15552 replacement has a 40 mm bore, 65 mm stroke, 40 mm adjustment, PT port, and a magnet for sensor compatibility. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-40S FAQ

The rear mechanical adjuster allows you to shorten the 65 mm nominal stroke by up to 40 mm, creating a usable travel window of 25-65 mm. The adjuster acts as a travel stop and does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X65-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.