
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X65-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 65mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X65-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 15-65 mm, allowing you to dial back the 65 mm nominal stroke by up to 50 mm during commissioning.
The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of position switches. This adjustable model utilizes a reduced mounting interface set—Basic, FA, LB, TC, FTC, TCM1, and TCM2—omitting the FB, CA, CB, and CR options found on some standard cylinders. The carbon steel piston rod features an M12x1.25 thread and pairs with a 30 mm air cushion at both ends to decelerate the moving load.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 15 to 65 mm end-stop during product size transitions without replacing the cylinder or bolting on external physical stops.
Trim the effective travel back by up to 50 mm on the fly to accommodate different material thicknesses in a clamping station.
An adjustable stroke is selected over a fixed SAI cylinder when you need to fine-tune the end position on product changeovers without swapping the physical unit or adding external stops. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for true drop-prevention, use an external rod lock or an AirTAC SAIL or BSAI series cylinder.
For ISO 15552 replacement matching, specify a 40 mm bore, 65 mm stroke, up to 50 mm adjustment, PT tapered port threads, the required mounting bracket, and no magnet. Because the nominal stroke is under 300 mm, side-load concerns are minimal, but the 16 mm rod still handles moderate guide loads effectively.
Quick checklist
The rear adjuster screw lets you shorten the 65 mm nominal stroke by up to 50 mm, creating a usable travel window of 15 to 65 mm. The adjuster acts as a mechanical stop to set the end position and does not function as a lock to hold the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.