
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X65-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 65mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X65-50-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the travel window down to 15-65 mm from its 65 mm nominal length. The integrated -S magnet supports position sensing via CMSE reed or DMSE electronic solid-state switches.
Because the adjuster acts purely as a mechanical stop at the retract end, it decelerates the load but will not hold position without live air pressure. For true fail-safe load holding, consider the SAIL or BSAI series instead. This extruded aluminum barrel unit uses a PT tapered G1/4 port and a 16 mm carbon steel rod.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 15-65 mm retract position during commissioning to perfectly strike a clamping mechanism without machining external spacers.
Quickly adjust the end-stop depth on a packaging line when switching to a different product size, reducing downtime significantly.
Use the 50 mm adjustment window to test multiple extension depths on a test rig before finalizing the fixed stroke for production.
The 50 mm adjustment range is ideal for machine setups requiring frequent product changeovers, letting you dial in the exact end-stop without swapping cylinders or adding external stops. When matching an ISO 15552 replacement, verify the 65 mm stroke, 50 mm adjuster, PT port thread, and the -S magnet requirement.
With a 65 mm stroke, side-load risks are minimal, but the 16 mm rod and M12x1.25 thread handle standard loads well. Note the available mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 50 mm, creating a 15-65 mm usable travel window. It acts as a mechanical stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.