verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-10

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X650-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 650mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke650 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$129.10 $136.60Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-10

The AirTAC SAIJ40X650-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 640-650 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to add CMSE reed or DMSE electronic switches if position feedback is needed later.

This model features a PT tapered G1/4 port and variable air cushions at both ends to decelerate the payload. The rear adjuster functions strictly as a travel stop for commissioning fine-tuning, not as a lock, meaning the load is never held without live air pressure. It supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-10 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X650-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke650 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-10

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×650Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-10 Is Used

precision_manufacturing

Variable End-Stop Tuning

Dial in the exact 640-650 mm retract position during machine setup without machining external stopper blocks.

conveyor_belt

Product Changeover

Quickly adjust the travel end for different package sizes on a packaging line using the rear stroke screw.

factory

Long-Stroke Assembly

Drive parts forward at 30-800 mm/s while relying on the built-in air cushions to soften the end-of-travel impact.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-10 the Right Cylinder?

The 10 mm adjustment range is ideal for variable end-stops during product changeover, saving you from swapping out a fixed-stroke SAI cylinder. For load-holding without continuous air pressure, consider the SAIL or BSAI series instead, as this adjuster only trims travel.

With a 650 mm stroke, the unsupported piston rod is highly susceptible to deflection, so an external guide is strongly recommended to prevent premature seal wear. This cylinder is dimensionally interchangeable per ISO 15552, featuring a PT port, no magnet, and the specified mounting set.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-10 FAQ

At 0.7 MPa, the push force increases to 879 N.

The rear adjuster screw lets you trim the 650 mm nominal stroke back by up to 10 mm, creating a 640-650 mm travel window. It acts as a physical stop and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X650-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.