
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X650-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 650mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X650-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 550-650 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches.
This model uses a PT tapered port thread and a 16 mm carbon steel rod with an M12x1.25 thread. The rear adjuster acts purely as a mechanical stop to fine-tune the retract end position during commissioning. It is not a locking device, so the cylinder cannot hold a load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 550-650 mm window during machine commissioning without adding external physical stops.
Quickly adapt the cylinder travel distance on a packaging line when handling different product sizes by adjusting the rear screw.
Fine-tune the end-of-stroke position on automated assembly equipment to accommodate varying part dimensions.
Choose this 40 mm bore adjustable-stroke cylinder when a machine requires variable end-stops or frequent product changeovers, eliminating the need to physically swap out a fixed-stroke SAI cylinder. If an application demands higher thrust, stepping up to the 50 mm bore yields 1374 N at 0.5 MPa. For load-holding without continuous air supply, consider the SAIL or BSAI series instead.
To match this ISO 15552 cylinder for a replacement, verify the 40 mm bore, 650 mm stroke, 100 mm adjustment range, PT G1/4 port, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 650 mm stroke is long, an external guide is recommended to prevent excessive side-loading on the unsupported rod.
Quick checklist
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from 650 mm down to 550 mm. It sets the travel end position but does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.