
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X650-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 650mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X650-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 620-650 mm usable travel window, allowing you to dial back the 650 mm nominal stroke by up to 30 mm during commissioning.
This model features a 16 mm carbon steel piston rod with an M12x1.25 thread, providing a robust interface for standard loads. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. It uses a PT tapered G1/4 port and supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 620-650 mm retract end-stop during product size changes without replacing the cylinder.
Dial in the exact end position during initial commissioning to accommodate varying material thicknesses.
Adjust the travel window on automated equipment to handle different package dimensions on the fly.
Choose this 40 mm bore when a 32 mm bore (offering 345 N pull at 0.5 MPa) lacks sufficient thrust for your tooling. The 30 mm rear adjustment screw is ideal for fine-tuning the retract end position without swapping cylinders or adding external stops. Because the nominal stroke is 650 mm, an external guide is recommended to prevent excessive side-loading on the unsupported rod. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air pressure, so consider a SAIL or BSAI cylinder if load-holding is required. This unit is dimensionally interchangeable per ISO 15552.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw lets you shorten the 650 mm nominal stroke by up to 30 mm, creating a 620-650 mm usable travel window for precise end-position tuning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.