
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X650-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 650mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X650-40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The -40 adjustment code allows you to trim the effective stroke by up to 40 mm directly at the rear stopper.
Equipped with a magnet for position sensing, this carbon-rod model works seamlessly with AirTAC CMSE reed and DMSE electronic switches fitted into the dual-side sensor grooves. The 16 mm rod and M12x1.25 thread provide robust resistance to side loads, while the PT tapered G1/4 port ensures reliable pneumatic flow.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-of-stroke position within the 610-650 mm window during line setup or product size changes without machining new hard stops.
Fine-tune the retract distance by up to 40 mm to accommodate varying material thicknesses or tooling lengths on automated machinery.
Choose this adjustable-stroke variant over a fixed SAI when you need fine end-position tuning during commissioning or product changeover without swapping the cylinder or adding external stops. Because the 650 mm stroke is long, an external guide is recommended to prevent rod sag and side-load wear. The rear adjuster acts strictly as a travel stop, not a lock; for load-holding without live air, consider the SAIL or BSAI series. This unit is dimensionally interchangeable with ISO 15552 cylinders, matching the 40 mm bore, 650 mm stroke, 40 mm adjustment, PT G1/4 port, and -S magnet configuration.
Quick checklist
The maximum operating pressure is 1.0 MPa.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the nominal 650 mm down to 610 mm. It decelerates the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.