
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X650-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 650mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X650-50 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the effective travel window anywhere between 600 and 650 mm. The extruded aluminum barrel features sensor grooves on both sides for straightforward position feedback.
A defining mechanical trait of this SKU is its M12x1.25 threaded carbon steel rod, which provides a robust attachment point for external tooling. Because the adjustment mechanism acts as a hard stop at the retract end, it sets the deceleration point without acting as a load-holding brake. For applications requiring position retention without live air pressure, an external pilot-operated check valve or an AirTAC SAIL locking cylinder is required.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 600-650 mm retract stop on a packaging conveyor to handle varying box lengths without reprogramming the PLC.
Quickly adjust the end-position during product format changes, saving commissioning time by avoiding physical cylinder swaps.
Fine-tune the retract distance on a metal-forming station to accommodate different material thicknesses accurately.
The 50 mm adjustment range is ideal for product-size changeovers on a packaging line, letting operators dial in the exact end position without swapping cylinders or fabricating external stop blocks. Mounting options include the reduced SAIJ set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR variants.
When replacing an ISO 15552 cylinder, verify the 40 mm bore, 650 mm stroke, 50 mm adjustment range, PT tapered port threads, and the chosen mounting kit. Because this is a 650 mm stroke, the unsupported piston rod is highly susceptible to side-loading; incorporating an external guide rail is strongly recommended to prevent premature seal wear. Note that the rear adjuster only trims the travel end and will not hold a load safely if air pressure drops.
Quick checklist
At the maximum 1.0 MPa pressure, the push force increases to 128 kgf.
The rear adjuster screw allows you to shorten the 650 mm nominal stroke by up to 50 mm, creating a usable travel window of 600 to 650 mm. This stopper only limits the travel end and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.