
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X650-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 650mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X650-75 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 650 mm travel by up to 75 mm. This creates a precise 575-650 mm usable window, allowing exact end-position tuning during commissioning without swapping out the physical unit. It features a carbon steel piston rod and a PT tapered port thread.
The rear screw acts purely as a travel stop for position refinement, not as a lock; it will not hold the load safely without continuous live air pressure. For load-holding requirements without supply pressure, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 575-650 mm travel window during format size changes on a packaging line without replacing hardware.
Fine-tune the retract end-position precisely during commissioning to avoid recalibrating fixed mechanical stops.
Adjust the stroke on the fly for diverter arms that must handle multiple package lengths on a single conveyor.
If you need less force, stepping down to a 32 mm bore yields 563 N at the same pressure, while stepping up to a 50 mm bore provides 1374 N. The adjustable stroke is chosen over a fixed SAI cylinder when you need to fine-tune the retract distance on the fly rather than machining external stop blocks.
Because this unit features a 650 mm stroke, the 16 mm diameter carbon steel rod will experience leverage forces under side loading; an external guide rail should be used to prevent premature seal wear. To achieve a true ISO 15552 replacement match, verify the 40 mm bore, 650 mm stroke, 75 mm adjustment range, PT port thread, and your required mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). This standard configuration omits a magnet, so position sensing via CMSE or DMSE switches is not supported without specifying the -S option.
Quick checklist
The rear adjuster screw lets you shorten the 650 mm nominal stroke by up to 75 mm, creating a 575-650 mm travel window. It functions as a mechanical stop to set the end position and relies on the air cushion for deceleration; it does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.