
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X650-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 650mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X650-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 575 to 650 mm usable travel window, allowing you to dial back the nominal 650 mm stroke by up to 75 mm during commissioning. Equipped with a standard -S magnet, it integrates seamlessly with AirTAC CMSE reed and DMSE electronic sensors via the dual-sided extruded aluminum barrel grooves.
The rear adjuster acts purely as a mechanical stop to set the end position; it does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the end-stop from 650 mm down to 575 mm when a production line switches to a different package size, eliminating the need to physically swap cylinders.
Uses the integrated -S magnet with DMSE electronic sensors to confirm end-of-stroke arrival, while the rear stopper handles the physical travel limit.
Select this adjustable-stroke model when an application requires precise end-position tuning at commissioning or frequent product-size changeovers without swapping cylinders or adding external stops.
Because the 650 mm stroke is relatively long, the 16 mm rod and M12x1.25 thread will still experience leverage forces on unsupported loads; an external guide is recommended to prevent side-load damage. This SAIJ model is dimensionally interchangeable per ISO 15552 footprint standards and supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). The PT tapered port thread and -S magnet configuration must be specified to ensure exact replacement matching.
Quick checklist
It operates at speeds ranging from 30 to 800 mm/s.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from its 650 mm nominal length down to 575 mm. It only sets the travel end and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.