verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X70-10

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X70-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 70mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke70 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$68.36 $75.86Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X70-10

The AirTAC SAIJ40X70-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 60-70 mm usable travel window from its 70 mm nominal stroke. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.

This model uses a PT tapered port thread and a 16mm carbon steel rod with an M12x1.25 thread. The rear adjuster acts purely as a travel stop for fine end-position tuning during commissioning and does not hold the load without live air. For load-holding requirements, an external rod lock or related SAIL series cylinder is required.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X70-10 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X70-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke70 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X70-10

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×70Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X70-10 Is Used

tune

End-Stop Calibration

Dial in the exact 60-70mm travel distance during machine commissioning to perfect component seating without swapping physical hardware.

settings_input_component

Product Changeover

Quickly adjust the retract end-position by up to 10mm on packaging lines handling slight product size variations.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X70-10 the Right Cylinder?

Choose this 40mm bore adjustable-stroke cylinder when your application requires precise end-stop tuning without adding external stops. If your force requirements are lower, the 32mm option suffices; if higher, step up to the 50mm. The SAIJ40X70-10 uses PT port threads and standard carbon steel rod material. It omits the FB, CA, CB, and CR mounting options, supporting only Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with standard ISO 15552 cylinders.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X70-10 FAQ

The rear adjusting screw acts as a mechanical stop, allowing you to shorten the effective stroke from 70mm down to 60mm. This adjuster only sets the travel end and does not lock or hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X70-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X70-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.