
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X70-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 70mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X70-10-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 60-70 mm usable travel window by trimming the 70 mm nominal stroke back by up to 10 mm. This on-board adjustability allows for fine end-position tuning at commissioning without adding external stops.
The extruded aluminum barrel includes sensor grooves on both sides, and the integrated magnet supports AirTAC CMSE reed and DMSE electronic switches for precise position feedback. It uses a PT tapered G1/4 port and variable air cushions at both ends to manage deceleration. The rear stopper mechanism only sets the travel end; it does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X70-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 60-70 mm travel window during product size transitions on a packaging line without swapping the physical actuator.
Fine-tune the retract end position at commissioning to absorb mechanical tolerances and achieve exact clamping or placement depth.
Set custom stroke limits on automated test fixtures where the effective travel distance must be adjusted between runs.
The adjustable stroke is ideal for machine setups requiring variable end-stops during product changeovers, replacing fixed-stroke SAI cylinders when exact positioning needs field-tuning.
For an ISO 15552 replacement match, verify the 40 mm bore, 70 mm stroke, 10 mm adjustment range, PT G1/4 port, and the -S magnet option. Because the rear adjuster acts as a travel stop rather than a lock, any load-holding requirement without live air pressure necessitates a SAIL or BSAI variant. The mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the 70 mm nominal stroke by up to 10 mm, creating a 60-70 mm usable travel window. This stopper sets the travel end and deceleration point, but it does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.