
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X70-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 70mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X70-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to shorten the nominal 70 mm travel by up to 20 mm. This creates a precise 50-70 mm usable travel window, enabling fine end-position tuning at commissioning without swapping out the barrel or adding external stops.
The rear adjuster acts strictly as a travel stop to set the retract end position, not as a lock, meaning it will not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series instead. This 40 mm bore profile cylinder supports speeds of 30-800 mm/s and includes sensor grooves on both sides for CMSE or DMSE switches.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X70-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 50-70 mm end-position during initial machine commissioning without machining external stopper blocks or changing the cylinder.
Quickly adjust the retract stroke by up to 20 mm on packaging lines to accommodate different product lengths during rapid format changeovers.
Use the rear stopper screw to fine-tune the travel limit on test fixtures, ensuring precise end-position tuning for varying component sizes.
If you need less force, stepping down to the 32 mm bore yields 402 N, while stepping up to the 50 mm bore provides 982 N. The adjustable rear screw is ideal for machine setups requiring variable end-stops or product-size changeovers, offering more flexibility than a fixed-stroke SAI cylinder.
When matching this ISO 15552 cylinder for an interchange, verify the 40 mm bore, 70 mm nominal stroke, 20 mm adjustment range, PT G1/4 port, and the standard carbon steel rod without a magnet. Because the stroke is under 300 mm, side-load stress is minimal, but always ensure the load is guided to prevent rod binding.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 128 kgf.
The rear adjuster screw allows you to trim the nominal 70 mm stroke back by up to 20 mm, creating a usable travel window of 50-70 mm. This stopper sets the travel end but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.