
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X70-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 70mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X70-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 70 mm stroke that can be dialed back by up to 20 mm, giving you a precise 50-70 mm usable travel window for commissioning without external stops.
This adjustable-stroke model uses an extruded aluminum barrel with sensor grooves on both sides. Because it includes the -S magnet option, it directly supports AirTAC CMSE reed and DMSE electronic solid-state switches for exact position detection. The rear adjuster acts purely as a travel stop to fine-tune the retract end, meaning it will not hold the load dynamically without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X70-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 50-70 mm retract distance instantly when switching between product sizes on a packaging line, avoiding mechanical rebuilds.
Fine-tune the final resting position of a tooling head at commissioning to compensate for mechanical tolerances without adding external stops.
Leverage the built-in -S magnet with DMSE electronic sensors to confirm part ejection within the adjusted travel window.
The adjustable 50-70 mm window is perfect for machine setups requiring variable end-stops during product changeovers, avoiding the need to physically swap out a fixed-stroke SAI cylinder. For load-holding without continuous air pressure, you would need a SAIL pneumatic lock or an external rod lock, as the SAIJ adjuster is not a brake.
To match this exact ISO 15552 replacement, specify: 40 mm bore, 70 mm nominal stroke, 20 mm adjustment range, PT port thread, carbon steel rod, and the -S magnet. The supported mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
Quick checklist
The rear adjuster screw lets you shorten the effective travel from the 70 mm nominal stroke down to 50 mm. This creates a 50-70 mm usable window, allowing you to set the exact retract end-position during setup without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.