
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X70-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 70mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X70-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 70 mm stroke that can be fine-tuned down by up to 30 mm, creating a usable travel window between 40 and 70 mm.
This adjustable design allows you to dial in the exact retract end-position during commissioning without swapping the cylinder or adding external stops. The rear adjuster functions strictly as a travel stop, not a lock, meaning it cannot hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X70-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the retract end-position from 70 mm down to 40 mm when switching between product sizes on a packaging line, avoiding mechanical rebuilds.
Fine-tune the final resting position during initial setup to achieve precise alignment without fabricating custom external spacers or stopper blocks.
Provide a flexible travel limit on automated assemblies where the exact stopping distance needs minor field adjustments to perfect the process timing.
If your application requires less force, stepping down to a 32 mm bore yields 402 N at 0.5 MPa; if you need more power, a 63 mm bore provides 1559 N. The adjustable stroke is ideal for machine setups requiring product changeovers or variable end-stops, whereas a fixed SAI cylinder suits applications with a constant, unchanging travel requirement.
To match this ISO 15552 dimensionally interchangeable cylinder, specify a 70 mm stroke with a 30 mm adjustment range, PT port threads, and your required mounting style from the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, or TCM2. Note that FB, CA, CB, and CR mounts are omitted from this series. Since no magnet is specified, this base configuration does not support CMSE or DMSE sensors.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster acts as a stopper that allows you to shorten the effective stroke by up to 30 mm. This creates a usable travel window between 40 mm and 70 mm, letting you set the exact end-position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.