
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X70-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 70mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X70-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 70 mm stroke that can be fine-tuned down by up to 30 mm, yielding a highly flexible 40-70 mm usable travel window.
This -S variant includes a magnet for position sensing and is perfectly matched with AirTAC CMSE reed and DMSE electronic solid-state switches. The extruded aluminum barrel features sensor grooves on both sides for straightforward mounting. Unlike fixed-stroke SAI models, this adjustable version allows you to dial in the retract end-position at commissioning without adding external stops. It uses a standard PT G1/4 port and a 16 mm carbon steel rod with an M12x1.25 thread.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X70-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 40-70 mm travel window during format size changes on a packaging line without swapping out the entire actuator.
Fine-tune the retract end-position during initial commissioning to perfectly seat components, eliminating the need for external mechanical stops.
Adjust the stroke on the fly for automated test fixtures that require different retraction depths for various part families.
If your setup needs less force, stepping down to a 32 mm bore yields 402 N; stepping up to a 50 mm bore provides 982 N. The rear adjuster on the SAIJ40X70-30-S acts purely as a mechanical stop to set the travel window between 40 and 70 mm, and the integrated air cushion handles deceleration. Neither component will hold a load without live air pressure. For load-holding requirements, consider an AirTAC SAIL or BSAI cylinder, or an external pilot-operated check valve. To match this ISO 15552 interchangeable unit exactly, specify the 40 mm bore, 70 mm stroke, 30 mm adjustment, PT G1/4 port, and the -S magnet option.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the effective travel from its 70 mm nominal stroke down to 40 mm. This creates a 40-70 mm usable window, letting you set the exact end-position during setup without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.