
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X70-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 70mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X70-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 30 to 70 mm, letting you dial back the 70 mm nominal stroke by up to 40 mm during commissioning.
This extruded aluminum profile cylinder includes variable air cushions at both ends and dual-side sensor grooves. It uses a PT tapered port (G1/4) and omits the FB, CA, CB and CR mounting options, relying instead on a reduced interface set of Basic, FA, LB, TC, FTC, TCM1 and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X70-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 30 to 70 mm travel window during product size changes without swapping the cylinder or adding external mechanical stops.
Set precise retract positions on the fly for multi-format packaging lines using the built-in 40 mm rear adjustment screw.
Fine-tune the final end-of-stroke position during initial setup to absorb mechanical tolerances and achieve exact clamping pressure.
The rear adjuster acts as a travel stop for fine end-position tuning without bolting on external stops, but it does not hold the load without live air; for pneumatic locking, consider the SAIL or BSAI series. To replace an ISO 15552 cylinder, match the 40 mm bore, 70 mm stroke, 40 mm adjustment, PT port, and your required mounting.
Because the 16 mm rod and M12x1.25 thread carry moderate side loads, ensure proper guidance for the attached payload. Since no magnet is specified, position sensing requires adding the -S option to use CMSE reed or DMSE electronic sensors.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 40 mm, providing a usable travel window of 30 to 70 mm. It acts as a travel stop and does not lock or hold the load without continuous air pressure.
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.