
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X70-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 70mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X70-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the external adjusting screw at the rear, you can shorten the effective travel from its 70mm nominal length, creating a precise 30-70mm usable stroke window. This allows you to fine-tune the retract end-position at commissioning without swapping the cylinder or adding external stops.
This model features a standard carbon steel piston rod and includes a magnet (-S) for position sensing. It works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches, which mount directly into the extruded aluminum barrel's dual sensor grooves. The adjuster acts purely as a mechanical stop to set the travel end, meaning it does not lock or hold the load without live air pressure. For applications requiring true load-holding without continuous air, consider the SAIL or BSAI series.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X70-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract end-position during initial machine commissioning. The 40mm adjustment window allows you to perfect the 30-70mm travel without machining custom spacers.
Quickly adapt the cylinder stroke when running a new product batch on the line. The rear stopper screw lets operators modify the travel window in seconds to match new part dimensions.
Provide adjustable mechanical stops for assembly stations that need flexible end-positions. The rear adjuster sets the travel limit while the variable air cushions decelerate the load.
Choose this 40mm bore adjustable-stroke model when your machine setup requires variable end-stops or frequent product-size changeovers. Conversely, if you require higher thrust, stepping up to a 50mm bore provides 982N. This SAIJ40X70-40-S is dimensionally interchangeable with ISO 15552 cylinders, featuring a PT tapered port thread, a 16mm rod with an M12x1.25 thread, and a 30mm cushion length at both ends.
When specifying a replacement, match the 40mm bore, 70mm nominal stroke, 40mm adjustment range, and the -S magnet option. The SAIJ series supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. Because the 16mm rod and M12x1.25 thread carry moderate side loads well, this cylinder is robust, though any long unsupported stroke still requires an external guide.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it can deliver up to 128 kgf.
The rear adjusting screw acts as a mechanical stop that can shorten the effective stroke by up to 40mm. This creates a usable travel window of 30 to 70mm, allowing you to fine-tune the retract end-position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.