
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X700-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X700-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position. With a 700 mm nominal stroke and a 10 mm adjustment range, it provides a usable travel window of 690-700 mm.
The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. This configuration uses a carbon steel piston rod with an M12x1.25 thread and PT tapered ports. The rear adjuster acts purely as a mechanical stop to set the travel limit and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 690-700 mm end position during initial commissioning without swapping cylinders or adding external stops.
Quickly adjust the stroke by up to 10 mm to accommodate slightly different package sizes on an automated line.
Fine-tune the retract distance to perfect the seating of components in medium-force assembly operations.
The adjustable stroke is perfect for applications requiring exact end-position tuning during commissioning or product changeovers, eliminating the need to swap out a fixed-stroke SAI cylinder or bolt on external stops. To match this ISO 15552 cylinder, specify a 700 mm stroke, 10 mm adjustment, PT port thread, and your required mounting style.
Because the stroke is 700 mm, the 16 mm rod should be adequately supported by an external guide to prevent excessive side-loading and premature seal wear. If your application requires the load to be held mechanically without continuous air pressure, consider the SAIL lock or BSAI clamp-lock series instead, as the SAIJ adjuster is only a travel stop.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.
The rear adjuster screw allows you to shorten the effective travel from the nominal 700 mm down to 690 mm. This creates a 690-700 mm usable window for fine-tuning the retract end position at commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.