
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X700-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X700-100 is a double-acting ISO 15552 profile cylinder with a 700 mm nominal stroke and a rear mechanical adjuster that allows you to trim the effective travel back by up to 100 mm. This creates a 600-700 mm usable stroke window, letting you fine-tune the end position at commissioning without adding external stops. The extruded aluminum barrel features sensor grooves on both sides for CMSE reed or DMSE electronic switches if needed later.
Because the adjuster acts purely as a travel stop on the retract end, it does not hold the load without live air pressure. For pneumatic load-holding without continuous pressure, consider the SAIL or BSAI series. The SAIJ uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract end position within the 600-700 mm window during line commissioning without machining custom spacers or swapping cylinders.
Quickly adapt the stroke end-stop on automated equipment when introducing a new product variant that requires up to 100 mm less travel.
Use the rear adjuster screw to set precise retract limits for tooling that needs flexible positioning but standard ISO 15552 mounting.
The 100 mm adjustment range is ideal for product changeovers on a line where the exact end position varies by up to 100 mm, replacing the need to swap out a fixed-stroke SAI cylinder. To match this ISO 15552 replacement, specify a 40 mm bore, 700 mm stroke, 100 mm adjustment, PT port thread, and the required mounting style.
With a 700 mm stroke, the 16 mm rod and M12x1.25 thread can carry moderate side loads, but an external guide is strongly recommended for long unsupported strokes to prevent rod bending. The operating speed is 30-800 mm/s, controllable via variable air cushions at both ends.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster acts as a mechanical stop that shortens the 700 mm nominal stroke by up to 100 mm, giving a usable travel window of 600-700 mm. It only sets the travel end and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.