
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X700-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X700-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear mechanical adjuster. It provides a nominal 700 mm stroke that can be dialed back by up to 100 mm, yielding a usable 600-700 mm travel window for precise end-position tuning during machine commissioning.
This adjustable-stroke design eliminates the need to swap out the entire cylinder or add bulky external stops when optimizing motion control. The extruded aluminum barrel includes sensor grooves on both sides, directly supporting AirTAC CMSE reed and DMSE electronic solid-state switches. Furthermore, the SAIJ mounting set deliberately omits FB, CA, CB, and CR brackets, focusing strictly on Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial the stroke back from 700 mm to 600 mm via the rear screw when introducing a shorter product format, skipping the need to physically swap actuators.
Fine-tune the retract position of a sorting arm to accommodate varying package lengths on a shared conveyor line.
Safely trim the forward travel limit during initial machine setup to prevent crashes before locking in the final 700 mm target position.
If your process requires less thrust, the 32 mm bore offers 402 N; if you need more power, the 50 mm bore provides 982 N at the same pressure. The 100 mm adjustment range is particularly valuable for lines handling frequent product size changeovers, allowing operators to fine-tune the retract distance on the fly without replacing the actuator.
Because the stroke is 700 mm, an external guide rail is strongly recommended to prevent excessive side-loading on the M12x1.25 rod thread. The SAIJ features PT tapered G1/4 ports and includes the -S magnet option. Remember that the rear adjuster acts only as a travel stop and does not function as a lock; the cylinder cannot hold a load without live air pressure. For true load-holding without continuous air, consider an AirTAC SAIL or BSAI series cylinder.
Quick checklist
The rear of the cylinder features an external adjusting screw that acts as a mechanical stopper. It allows you to shorten the effective stroke by up to 100 mm, providing a usable travel window of 600 to 700 mm without changing the cylinder itself.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.