
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X700-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X700-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the external rear screw, you can shorten the effective travel, creating a 690-700mm usable stroke window for precise end-position tuning without adding external stops.
This variant includes a standard carbon steel piston rod and a magnet for position sensing. It uses PT tapered ports sized G1/4 and features variable air cushions at both ends. The extruded aluminum barrel integrates sensor grooves on both sides, allowing you to mount CMSE reed or DMSE solid-state switches directly along the body.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 690-700mm travel window during product family changeovers without physically replacing the cylinder or adding machined spacers.
Fine-tune the retract position on long-stroke conveyor diverters to accommodate different package sizes on the fly.
Trim up to 10mm of stroke during initial machine commissioning to perfectly sync the end-of-stroke position with downstream tooling.
Choose this 40mm bore when an application requires moderate thrust but demands exact end-position calibration during commissioning or product changeover. Conversely, dropping to a 32mm bore reduces the push force to 402N. The adjustable rear stopper lets you dial in the exact 690-700mm travel window on the fly, which is far more efficient than machining spacers or swapping to a fixed-stroke SAI cylinder.
Because the nominal stroke is 700mm, the 16mm diameter rod and M12x1.25 rod thread will experience amplified leverage on unsupported loads; always use an external guide to prevent side-load damage. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. Remember that the rear adjuster acts only as a travel stop and deceleration device—it does not hold the load without live air. For true fail-safe load holding, consider the SAIL or BSAI series.
Quick checklist
It operates at a speed range of 30-800 mm/s and features a G1/4 PT tapered port.
The rear adjuster screw acts as a mechanical stop that lets you trim the effective travel back by up to 10mm, creating a 690-700mm usable stroke window. It only sets the travel end and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.