
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X700-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X700-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down to a 680-700 mm window.
This model features a 16 mm carbon steel rod with an M12x1.25 thread, paired with a PT tapered G1/4 port. The extruded aluminum barrel includes dual sensor grooves, and since no magnet is specified, it operates without position sensing. The rear adjustment screw acts purely as a mechanical stop for end-position tuning and does not lock the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 680-700 mm travel window during machine setup to achieve precise end-positioning without external stops.
Quickly adjust the retract stop to accommodate different product sizes on the same production line.
The adjustable stroke is ideal for machine commissioning or product changeovers, allowing you to dial in the exact end-stop without swapping the cylinder or adding external stops. For load-holding without continuous air pressure, consider the SAIL or BSAI series instead.
Because the 700 mm stroke is relatively long, the 16 mm rod requires external guidance to prevent excessive side-loading and premature wear. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. It is dimensionally interchangeable per ISO 15552 and operates at speeds between 30-800 mm/s.
Quick checklist
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 700 mm nominal stroke by up to 20 mm, resulting in a usable 680-700 mm travel window. It is a stop, not a lock, and requires live air to hold position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.