
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X700-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X700-20-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 680 to 700 mm. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
Because the stroke extends to 700 mm, the 16 mm rod requires external guiding to prevent excessive side-loading and premature seal wear. The rear adjuster acts purely as a mechanical stop for end-position tuning during commissioning; it does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 680-700 mm travel window to accommodate varying product lengths on a packaging line without changing the cylinder.
Fine-tune the retract end-position during initial commissioning to align tooling precisely, avoiding the need for external stopper blocks.
Leverage the built-in magnet and dual sensor grooves to mount CMSE or DMSE switches for accurate end-of-stroke detection.
Choose this adjustable-stroke model over a fixed SAI cylinder when you need precise end-position tuning at machine setup or during product changeovers without swapping the physical cylinder. If your application requires less force, stepping down to a 32 mm bore yields 563N at 0.7 MPa. The integrated -S magnet enables position sensing via CMSE reed or DMSE electronic switches.
This cylinder uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and is dimensionally interchangeable with ISO 15552 cylinders. Given the 700 mm stroke, an external guide rail is strongly recommended to support the load and absorb lateral forces, as the rear adjuster and air cushions only decelerate the travel end, providing no braking function.
Quick checklist
The rear adjuster allows you to shorten the effective stroke by up to 20 mm, creating a 680-700 mm travel window for fine-tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.