verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-30

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X700-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke700 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$129.10 $136.60Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-30

The AirTAC SAIJ40X700-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 700 mm stroke that can be dialed back by up to 30 mm, giving you a 670-700 mm usable travel window for fine-tuning end positions during commissioning.

This model features a carbon steel piston rod with an M12x1.25 thread, paired with a PT tapered G1/8 port. The extruded aluminum barrel includes sensor grooves on both sides for CMSE or DMSE switches, though this specific SKU is configured without a magnet. Adjustment is achieved via an external stopper at the rear, which works alongside the standard 30 mm air cushions at both ends to decelerate the load smoothly.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-30 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X700-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke700 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-30

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×700Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-30 Is Used

settings_input_component

Product Changeovers

Dial in the 670-700 mm travel window during format changes on packaging lines, avoiding the need to physically swap out cylinders for different package sizes.

tune

Commissioning Calibration

Fine-tune the exact retract end-position during machine setup, using the 30 mm rear adjuster to perfectly align tooling without adding bulky external stops.

conveyor_belt

Variable End Stops

Sort or divert items on a conveyor by adjusting the stroke length on the fly, accommodating different product lengths without re-engineering the station.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-30 the Right Cylinder?

If your application requires less than 402 N, stepping down to a 32 mm bore saves space. The adjustable 670-700 mm window is perfect for machine setups requiring variable end-stops or product changeovers without swapping the cylinder. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets.

Because the 700 mm stroke is substantial, the M12x1.25 rod will experience deflection under heavy side loads; always use an external guide to prevent binding. Remember that the rear adjuster is a travel stop, not a lock—the SAIJ40X700-30 cannot hold its position without live air pressure. For load-holding without continuous air, consider an AirTAC SAIL or BSAI cylinder, or an external rod lock.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-30 FAQ

If you increase the operating pressure to 0.7 MPa, the push force rises to 879 N.

The rear adjuster acts as an external stopper that trims the effective travel. For the SAIJ40X700-30, you can shorten the 700 mm stroke by up to 30 mm, creating a 670-700 mm usable window. It is a travel stop, not a lock, and does not hold the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X700-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.