
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X700-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X700-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a usable travel window of 670 to 700 mm. The extruded aluminum barrel includes sensor grooves on both sides, and because this SKU includes a magnet (-S), it works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches.
This adjustable-stroke design lets you fine-tune the retract end position at commissioning or during product changeovers without swapping the cylinder or adding external stops. The 16 mm carbon steel rod with an M12x1.25 thread handles standard loads well, but with a 700 mm stroke, you should use an external guide to prevent excessive side-load wear. The rear adjuster acts purely as a travel stop, not a lock, so it cannot hold a load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 670-700 mm retract position during product size transitions without physically replacing the cylinder or adding external mechanical stops.
Fine-tune the final end-stop during initial commissioning to compensate for mechanical tolerances or sensor flag placement using the rear adjuster screw.
Vary the ejection stroke length on a packaging line to push different carton sizes accurately without changing out the entire pneumatic assembly.
Choose this 40 mm bore when you need more thrust than the 32 mm version (402 N at 0.5 MPa) but want to step down from the 50 mm bore (982 N at 0.5 MPa) to save space and air consumption. An adjustable stroke is ideal for machines requiring variable end-stops or precise end-position tuning without machining new hard stops, unlike a fixed-stroke SAI cylinder. If your application requires true load-holding without continuous air pressure, the rear adjuster here will not suffice; you should look at the SAIL (air-released lock) or BSAI (clamp-lock) series instead. To match this ISO 15552 replacement exactly, specify: 40 mm bore, 700 mm stroke, 30 mm adjustment, PT G1/4 port, mounting from the Basic, FA, LB, TC, FTC, TCM1, or TCM2 set, and the -S magnet option.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to trim the effective stroke back by up to 30 mm, creating a usable travel window between 670 and 700 mm. It acts as a mechanical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.